|
|
|
|
Blog by JasmineCorp | Create your own Blog
|
RSS Feed | Login |
OBD2Tuning china obd2 tuning tool center
|
How to use OBD2Tuning Vas 5054a oki chip Bluetooth vas 5054a regenerate DPF for VAG vehicles By Betty at 2015-01-20 01:05:53
|
Vas 5054a oki chip can do diagnosis for vag vehicles. Bluetooth vas 5054a package with odis 2.02 software. Below OBD2Tuning sharing How to use Vas 5054a oki chip Bluetooth vas 5054a regenerate DPF for VAG vehicles.
Vas 5054a with oki support uds with carck vw odis 2.01 license
Vas 5054a with oki support uds with carck vw odis 2.01 license
How to use Vas 5054a oki chip Bluetooth vas 5054a regenerate DPF for VAG vehicles:
Supported vehicle type:
1Zxx4x (Octavia II 2.0l/103 kW) 1Zxx5x (Octavia II 1.9l/77 kW) 1Zxx9x (Octavia II 2.0l/125 kW) 3Uxx5x (Superb 2.0l/103 kW)
Fault: Recommended procedure for the detection of saturation and recovery DPF.
Solution workshop: Detection of saturation: Vehicle self diagnostics. 01 – Engine electronics 11 – Block of measured values Block 75, displayed field 3
The saturation value is given in percent.
Saturation limit values: 1) up to 75% - the recovery is carried out during driving by engine control unit itself; 2) over 75% - the recovery carried out using the VAS 5054A diagnostic devices.
Recovery: - speed over 60 kmph; - engine speed 1800–2500 rpm; - enter 15 Access right, Coding 2 function number 21295; - watch the measured value block 75 field 3, the saturation value has to be dropped to 15%; - the whole procedure takes 10 to 15 min.
This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.
|
Permalink | Comments (0) |
Comments
|
To add a comment please login by clicking here
|
|